what is veneer

A veneer is a very thin piece of wood that is attached to particle board or other types of manufactured wood. Veneers are used to lessen the cost of a project without sacrificing the overall appearance.

A veneer is a thin piece of hardwood that is placed over a piece of manufactured wood. It may be attached using an adhesive, nails or screws. Veneers are frequently used on cabinets, furniture and floors. The frame and shelves of the units are made of particleboard, MDF or plywood, but the viewable surfaces are covered with veneers. This gives the appearance that the product is solid hardwood, but it is much more cost effective for many homeowners. Veneers are available in a variety of grains and finishes, and they are typically much more consistent in appearance than most hardwood products. Some carpenters create their own veneers, while others purchase veneers from manufacturers. Veneers are especially suitable for door panels, exposed sides and interior cabinet areas that will be viewable.

There are different types of wood veneer and qualities depending on the production method used, the subsequent handling and the color of the veneer. Find out in this article the best types of veneer and their unique characteristics.

Veneer is an essential part of the layout of kitchens, bathrooms, shelving and shop windows. The veneer is available in several types to ensure a charming decoration. 

When you hear about veneer, you usually think of a mere coating of various furniture and furnishings, made with thin sheets of wood of various types.

Veneer is obtained by unrolling the wood from a trunk to obtain a sheet of real wood which will then be cut to the desired dimensions. Wood veneer therefore has all the qualities of wood, but it is easier to handle and cut.

Veneers can be classified according to production method and appearance (drawing). According to the production method, veneer is divided into natural (sliced ​​and peeled) veneer and fine-line veneer (reconstituted).

Wood veneers are defined as thin sheets (from 0.3 to 3 mm) obtained by cutting the logs horizontally. The veneers must be applied to substrates of less noble materials such as chipboard, MDF, blockboard, honeycomb, to produce components for the manufacture of furniture or furnishings that have a similar appearance to solid wood, but with lower costs and excellent quality.

Leave a Reply

Your email address will not be published.